Bob’s Machine Shop’s standard series jack plates have a proven track record. Less weight on the transom, pump protected inside the boat, lifetime structure warranty to original end user, and 5 year warranty on pump!
Our standard series Hydraulic jack plates have been on the market since 1978 and are a proven unit. They have been redesigned, but the concept has remained. The lightest weight hydraulic jack plate on the market! The standard series belief is to keep the least amount of weight on the transom, and by keeping the pump inside the boat, keeps this weight down. All standard series jack plates have a lifetime warranty on the structure to the original end user, and a 5 year warranty on the hydraulic pump motor.
Jack plates are used to improve an outboard boats speed, holeshot, fuel efficiency, and the boater navigate in shallow waters. To help find the correct setback for your boat, give us a call! 1-855-JACKPLATE
Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback. Can be pre-drilled for side mount power poles on request when ordering. Please specify port, starboard, or both.
Pump inside boat
Improves fuel efficiency
Large powerful motor that can lift heavy outboards under full power
Lifetime warranty on structure, 5 years on pump to original end user
Automotive grease nipples for easy lubrication
Tension rods
Made in USA, in our own factory in Tampa, Florida
Rated for 115HP, upto 425 lbs motors (heavier should use Extreme series)
Sides predrilled for shallow water anchors
All models are manufactured with aluminum and stainless steel. The Minimum Lift Above Standard Transom is 7-1/2″.(1-½” built in. 6″ rise)
*Price includes complete package (lift, controls, pump, switch, hoses, instructions, oil and limited LIFETIMEstructural workmanship warranty.
Warranty on the pump (against defects of quality and workmanship) is 60 months. LONGEST IN THE INDUSTRY. Wire harness and solenoids warranty is 12 months.
Informazioni aggiuntive
Modello
100-104000 4″ 115 HP LIGHT, 100-104100 4″ 300 HP HEAVY DUTY, 100-106000 6″ 300 HP, 100-108000 8″ 300 HP, 100-110000 10″ 300 HP, 100-112000 12″ 300 HP, 100-114000 14″ 300 HP
Setback Standard Series Jack Plate
€1,779.00 – €2,754.00
Bob’s Machine Shop’s standard series jack plates have a proven track record. Less weight on the transom, pump protected inside the boat, lifetime structure warranty to original end user, and 5 year warranty on pump!
Descrizione
Our standard series Hydraulic jack plates have been on the market since 1978 and are a proven unit. They have been redesigned, but the concept has remained. The lightest weight hydraulic jack plate on the market! The standard series belief is to keep the least amount of weight on the transom, and by keeping the pump inside the boat, keeps this weight down. All standard series jack plates have a lifetime warranty on the structure to the original end user, and a 5 year warranty on the hydraulic pump motor.
Jack plates are used to improve an outboard boats speed, holeshot, fuel efficiency, and the boater navigate in shallow waters. To help find the correct setback for your boat, give us a call! 1-855-JACKPLATE
Offered in 4″, 6″, 8″, 10″, 12″ and 14″ setbacks, Bob’s Jack plates offer 1 piece design, unlike competitors that require setback spacers to achieve the proper setback. Can be pre-drilled for side mount power poles on request when ordering. Please specify port, starboard, or both.
Pump inside boat
Improves fuel efficiency
Large powerful motor that can lift heavy outboards under full power
Lifetime warranty on structure, 5 years on pump to original end user
Automotive grease nipples for easy lubrication
Tension rods
Made in USA, in our own factory in Tampa, Florida
Rated for 115HP, upto 425 lbs motors (heavier should use Extreme series)
Sides predrilled for shallow water anchors
All models are manufactured with aluminum and stainless steel. The Minimum Lift Above Standard Transom is 7-1/2″.(1-½” built in. 6″ rise)
*Price includes complete package (lift, controls, pump, switch, hoses, instructions, oil and limited LIFETIMEstructural workmanship warranty.
Warranty on the pump (against defects of quality and workmanship) is 60 months. LONGEST IN THE INDUSTRY. Wire harness and solenoids warranty is 12 months.
Informazioni aggiuntive
100-104000 4″ 115 HP LIGHT, 100-104100 4″ 300 HP HEAVY DUTY, 100-106000 6″ 300 HP, 100-108000 8″ 300 HP, 100-110000 10″ 300 HP, 100-112000 12″ 300 HP, 100-114000 14″ 300 HP